Home > Products > Assembling patio roofs

Assembling patio roofs

You can assemble our terrace or patio roofs yourself or we can do it.

The assembly of our All Weather patio roof

In general, the assembly of type ES All Weather will be carried out by our specialists, since it is a permanent structure and it must be mounted in a proper way. In exceptional situations where the ES AW should be mounted on a concrete or steel substructure, there is no need to make a foundation (it can be directly attached to the concrete or steel). In most cases, the roof will be placed on a terrace or a garden where a foundation needs to be constructed. We make these foundations wthout concrete by so-called screw anchors, which are screwed in the ground. You can see this process in the pictures and videos provided on this page.

The screw anchor systems have a number of great advantages over a foundation made ​​on the concrete:

  • We only need an opening of 25 x 25 cm on the ground or the tiled floor (there is no need to dig the ground or drill a hole in the concrete etc.).
  • The system is weather independent (no limitation regardless of frost or rain ).
  • The system is "clean": no sand/mud/concrete etcetera.
  • The anchors can be easily removed or unscrewed, in case the roof needs to be relocated.
 
 
Anker is in de grond gedraaid en gereed

Schematische weergave anker in de grond

 
De machine draait het anker in de grond

Schroeffunderingsmachine plaatsen

 
De machine draait het anker in de grond

Detail machine

 
Eenvoudig uitdraaiend anker

Voorboren

 
Voorboren

Ligger vastmaken aan paal

 
Paal bevestigd op anker

Anker in grond

 
Ruimte om anker vrijmaken tbv montage anker aan palen

 

More information

Buitink Technology owns years of experience in manufacturing and developing almost all kinds of tensioned membranes. We offer creative solutions to meet your needs and the best possible costs.

We like to advise in an early stage about possible applications and technical feasibility. Call Buitink Technology: +31 316 25 08 30, email: info@buitink-technology.com or leave your contact information.

Logo-Texyloop.jpg "Our waste materials and by-products are recycled by Texyloop"